Table of Contents
Advertisement
•
Set the duration of the Delay Duration. This signifies the time after which the DNIS information is to be
sent while making an outgoing call. Valid range is 0001 to 9999 msec. Default: 100 msec.
•
Set the duration of the Start Delay Timer. This signifies the time for which SARVAM UMG waits for
receiving DNIS from the network. This timer is loaded on receiving the Off-hook (I/C Seizure) on the
receive channel (while receiving an incoming call). Valid range is 0001 to 9999 msec. Default: 20 msec.
Register Signaling Variant
•
Select the Register Signaling Variant for T1/E1 Ports. You can select — DTMF, Decadic, MFC R2 or
MFC R1. Default: DTMF.
•
Select the Inbound ANI/DNIS Format for T1/E1 Ports. You can select — ANI, DNIS, ?ANI?, ?DNIS?,
?ANI?DNIS? or ?DNIS?ANI?. Default: ?ANI?DNIS?.
•
Enter Inbound Delimiter (?) Character as per your requirement. Characters supported in this field are 0-
9, #, *, A, B, C and D. Default: *
•
Select the Outbound ANI/DNIS Format for T1/E1 Port. You can select — ANI, DNIS, ?ANI?, ?DNIS?,
?ANI?DNIS? or ?DNIS?ANI?. Default: ?ANI?DNIS?.
•
Enter Outbound Delimiter (?) Character as per your requirement. Characters supported in this field are
0-9, #, *, A, B, C and D. Default: *
Maintenance
•
FDL is used for communicating general maintenance information for transmitting user defined information
within the T1 link. General maintenance information is in the form of Performance Message Report which
is generated by SARVAM UMG. Depending upon the FDL Protocol, the Performance Message Report is
sent every second, or sent on request.
•
Select the FDL Flag check box to enable, if the Network (Public or Private) to which SARVAM UMG is
connected supports FDL. Default: Disabled.
•
After enabling the FDL Flag, select the FDL Protocol — ANSI T1 403 or AT&T 54016 — for reporting the
performance monitoring. Default: ANSI T1 403.
Copy T1-RBS Parameters
•
You can also copy the settings of a T1-RBS from one T1E1 port to the another using the Copy button. To
do this,
Matrix SARVAM UMG System Manual
390
Advertisement
Table of Contents
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?