Table of Contents
Advertisement
The number is allowed to be dialed, if it:
•
matches with both lists.
•
matches with Allowed Number list, but not with the Denied Number list.
•
matches with neither the Allowed List nor the Denied List.
The number is denied, if it matches with the Denied Number list, but not with the Allowed Number list.
The system does not apply the Allowed-Denied Logic:
•
When dialed number string matches with any Access Code.
•
When dialed number string matches with any Emergency Number.
•
When any one of the following is selected to Route all Incoming Calls (with CLI):
•
on the basis of Calling Party Number
•
to a Fixed Destination Number
•
on the basis of DDI Number
To apply Allowed - Denied Logic on the SIP Trunk,
•
Select the Allowed - Denied Logic check box.
•
In the Allowed Number List, select the list number you have configured with numbers you want to
allow to be dialed out from the SIP Trunk. Default: 07
If you have not configured the Allowed Number List,
•
Click Settings
•
You may configure the default Allowed Number List or any other list. See
configure the allowed numbers.
•
Click Submit to save the Allowed Number List and close the window.
•
In the Denied Number List, select the list number you have configured with numbers you want to
restrict to be dialed out from the SIP Trunk. Default: 08
If you have not configured the Denied Number List,
•
Click Settings
•
You may configure the default Denied Number List or any other list. See
the restricted numbers.
•
Click Submit to save the Denied Number List and close the window.
Matrix SARVAM UMG System Manual
. The Number Lists window opens.
. The Number Lists window opens.
"Number Lists"
to
"Number Lists"
to configure
330
Advertisement
Table of Contents
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?