Matrix Telecom SARVAM UMG System Manual page 245

Copy Channel Based Routing Parameters
• You can also copy the settings of a BRI Channel to another BRI Channel using the Copy button. To do
this,
• Click the Copy button. The Copy BRI Port Channel based routing parameters from Channel
Number window opens.
• In the Copy BRI Port Channel based routing parameters from Channel Number box, select the
number of the channel you want to copy settings From. Select the check boxes of the desired channel
numbers you want to copy the settings To.
• If you want to copy the settings To all the channels, select the All check box.
• Click the OK button.
• Once you have copied the settings, you can again edit the specific parameters of the BRI Channel you
copied the settings to.
• Close the BRI Port 1 Channel Number 1 window.
• To configure Channel 2, click CH-2 on the BRI Port 1 - Call Routing - Channel Number Wise window
and follow the same instructions as given above.
• Close the BRI Port 1 - Call Routing - Channel Number Wise window.
MSN/DDI Number Wise
To configure Handling of Incoming Calls for each MSN Number,
• Select the MSN/DDI Number Wise check box.
• Click Settings
239
.
Matrix SARVAM UMG System Manual