Matrix Telecom SARVAM UMG System Manual page 327

• For the No Match Found entry in the table, click Edit
• The Edit Entry window opens.
• Create the Routing Group and Fallback Routing Group as per your requirement.
• Click Submit and close the window.
• Close the window if you have finished adding/editing entries.
You can also configure the Destination Number Based Table from Advanced Settings. For instructions,
see "Destination Port Determination"
On the basis of Calling Party Number
In this method, incoming calls on the SIP Trunk are routed to a specific port as per the calling party's number.
To apply this method, do the following:
321
.
under Advanced Settings.
Matrix SARVAM UMG System Manual