Matrix Telecom SARVAM UMG System Manual page 533

(Member 4). For every incoming call, SARVAM UMG will check the status of Member 1 (SIP Trunk 1)
first. If free, the call will be routed using this port else system will check status of Member 2 (SIP Trunk
2) and so on.
• Rotation: The first call will be routed through the first member port and the subsequent call through the
next member port and so on. For example, SIP Group Number 2 has four members SIP Trunk 6
(Member 1), 7 (Member 2), 8 (Member 3) and 9 (Member 4). For the first incoming call, SARVAM UMG
will check the status of Member 1 (SIP Trunk 6). If free, the call will be routed using this port else
system will check status of Member 2 (SIP Trunk 7) and so on.
If the first call has been routed through Member 1 (SIP Trunk 6), then for the next call, system will
check the status of Member 2 (SIP Trunk 7) but if the first call has been routed through Member 2 (SIP
Trunk 7), then the system will check the status of Member 3 (SIP Trunk 8) to route the call. Similarly, for
the subsequent calls the system will check the next member port in the group.
Default: First Free.
• Click Submit to save the group.
• Select Default, to set the parameters of a particular group to default.
• Select Default All, to set the parameters of all the groups to default.
• Similarly, you can create FXS Groups, FXO Groups and Mobile Groups.
• To create Groups of FXS Ports, click FXS - Group.
• To create Groups of FXO Ports, click FXO - Group.
• To create Groups of Mobile Ports, click Mobile - Group.
To create T1E1 Group,
• Click the Advanced Settings link to expand.
527 Matrix SARVAM UMG System Manual