Matrix Telecom SARVAM UMG System Manual page 524

Wildcard Characters
SARVAM UMG supports following characters.
Character
X (letter X)
#
*
+
- ]
[
[ , ]
[ ^ ]
T (letter T)
• Select the CLI Number to be sent on Destination Port. You can select Received Calling Party or
Received Called Party. Default: Received Calling Party.
CLI to be sent on Destination Port is applicable when FXS Port/ Group is determined as the Destination
Port.
• Create the Routing Group.
• To create a group of sequential FXS Ports as members,
• Select the desired FXS Port numbers as members. Default:1.
Matrix SARVAM UMG System Manual
Description
X represents any single digit from 0 to 9.
When # is configured in a number string, it will not be considered as End of Dialing.
When * is configured in a number string, it will not be considered as End of Dialing.
+ (plus) can be configured as a first character of the Destination Number string in the
SIP Trunk-Destination Port Determination-Destination Number Based table only.
Hyphen within the bracket, defines a range. Only digits 0-9 are allowed within a bracket.
Comma within a bracket is used as a separator between the groups of numbers.
Caret within a bracket is used to deny or restrict the number or range defined after the
symbol. Only digits 0-9 are allowed after the caret.
Character T can be configured only as a last character in a number string. When
configured in a number string, the system waits for End of Dialing.
518