Matrix Telecom SARVAM UMG System Manual page 467

are advanced by one hour at 01:00 hours GMT at the start of DST and set back by one hour at 01:00 hours GMT
when DST ends. Let us take the example of setting DST, if SARVAM UMG were installed in Berlin, Germany. In the
year 2011, the DST in Berlin starts on Sunday, 27 March at 02:00:00 hours and ends on Sunday 30 October at
03:00:00 hours. To set DST you must do the following:
Select the DST Type as Custom.
1.
Set the Time Offset as 60 minutes.
2.
Select the option Date-Month Wise as Type
3.
Configure the DST Start as follows:
4.
• Select March as the Month.
• Select 27th as the Date.
• Set Time to 01:59:59
Now, go to the option DST End, and configure as follows.
5.
• Select October as the Month.
• Select 30th as the Date.
• Set Time to 02:59:59.
Click Submit to save DST settings.
6.
On Sunday 27 March at 01:59:59 the SARVAM UMG will set the clock forward by 1 hour. On Sunday 30 October,
SARVAM UMG sets the clock back by 1 hour at 02:59:59.
SNTP Settings
To use SNTP for synchronizing with the Real Time Clock,
• Under Basic Settings, click the Date and Time Settings link.
• Go to SNTP Settings on this page.
• In SNTP Server Address, enter the Time Server Address. The SNTP Server address can be of maximum
40 characters. Default: Blank.
• By default, the time zone for the country/region where SARVAM UMG is installed is automatically selected
when you select 'Region'. If required you may change the time zone by selecting the desired country/
region from the Time Zone list. Default: India (GMT+05:30).
• If you want the system to synchronize date and time with the SNTP server automatically at Power On,
select the Auto Date and Time Sync with SNTP during Power ON? check box.
19. You can also select Day-Month-wise as Type.
461
19
.
Matrix SARVAM UMG System Manual