Matrix Telecom SARVAM UMG System Manual page 539

• On receiving a call, the SETU VFXTH at Location-A routes this call through the FXS Port of the SETU
VFXTH to the FXO Port of the PBX, which is further routed to 2001.
How to Configure
To use Peer-to-Peer calling, you must configure the related SIP Trunk parameters for the Peer-to-Peer application,
namely: SIP Trunk Mode, Peer-to-Peer Table, SIP ID and Handling of Incoming Calls. For instructions, see
Trunk" under Basic Settings.
You can also configure the Peer-to-Peer Table from the SIP Trunk page under Basic Settings.
To configure the Peer-to-Peer Table,
• Click the Advanced Settings link to expand.
• Click the Peer-to-Peer Dialing link.
• The Peer-to-Peer Dialing table opens.
In the Peer-to-Peer table, the first entry is reserved for No Match Found.
• Click the Add button. The Add Entry window opens.
• In Destination Number, enter the number you expect the callers to dial. You may enter upto 64
characters (Digits +
Hyphen [-], Caret [^]. Default: Blank.
533
"Wildcard Characters") in this field. Valid characters: 0 to 9, *, #, X, T, Comma [,],
Matrix SARVAM UMG System Manual
"SIP