•
Select the Hotline Enable check box. Default: Disabled.
•
In Number, enter the Number to be dialed out from the port when you go Off-hook. Default: Blank.
•
Set the duration of the Timer after which the Hotline Number is to be dialed out after you go Off-hook. The
range of this timer is 1 to 9 seconds. Default: 5 seconds.
To set or cancel Hotline from the Phone,
•
Lift handset of your phone.
•
Dial #151-1 to set.
•
Dial #151-0 to cancel.
•
Dial #152-Destination Number-End-of-Dialing to configure Hotline Number.
Where, Destination Number can be of maximum 24 digits. Digits 0 to 9, *, #, dot (.) are allowed.
End of Dialing may be # or * as configured in the system.
•
Dial #153-Timer to set the Hotline Timer.
Where, Timer value is from 1 to 9 seconds. Default: 5 seconds.
•
Replace handset.
615
Matrix SARVAM UMG System Manual
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?