Matrix Telecom SARVAM UMG System Manual page 342

• Click Settings
• The Automatic Number Translation Table window opens.
• You may configure the default Automatic Number Translation Table 5 or any other Table. See
"Automatic Number Translation (ANT)"
• Click Submit to save the ANT Table and close the window.
• Return to ANT parameter and assign the ANT Table you configured.
• Click Submit to apply List.
• Select the Route calls returned unconnected to Original Caller check box, if you want SARVAM UMG
to route outgoing calls made from this Trunk that return unconnected back to the original caller.
If you enable this feature, when an outgoing call is made using this Trunk, and the Called Party is found
busy or does not respond, SARVAM UMG stores the number of the calling party, the number of the called
party and this trunk (through which the outgoing call was made). A record of each such call is stored for the
duration of the Unconnected Calls Record Delete Timer (configurable; default: 999 minutes).
If the called party returns the call before the expiry of this Timer, SARVAM UMG checks whether Apply
RCOC only if the caller calls back on the same trunk from which the call was made is enabled or not, and
accordingly places the incoming call to the original calling party. To change the duration of this timer,
delete records of such calls and enable/disable the Apply RCOC only if the caller calls back on the same
trunk from which the call was made check box, see
Matrix SARVAM UMG System Manual
.
to configure the ANT Table.
"System Parameters".
336