Matrix Telecom SARVAM UMG System Manual page 700

• Next Upgrade On: This displays the date (DD:MM:YYYY) and time (HH:MM), when SARVAM UMG
will again check for new configuration on the server.
• Last time when Synchronized with Server: This displays the date (DD:MM:YYYY) and time
(HH:MM), when SARVAM UMG last resynchronized with the server for new configuration.
• Status of Last Synchronization: This displays the status of last synchronization. The possible status
messages that may appear are listed in the table below.
Possible Responses
Invalid Parameters
Local Failure
Resolving Server Address
Server Not Found
Send Request Failed
Connecting to Server
TCP/TFTP Connection Failed
Connection Failed
Permission Denied
Downloading Config File
File Not Found
Config Decryption Failed
Config Parsing Failed
Successfully Updated
Matrix SARVAM UMG System Manual
Event
When parameters are not valid.
When internal error occurs, like Thread Creation failed.
When IP Address is not found using DNS query.
When server is not connected after the expiry of Retry
Timer and Retry Counter.
When there is Curl Internal Error
When system is establishing TCP connection with server
until the expiry of Retry Timer and Retry Counter.
When no response is received for TCP/TFTP connection
until expiry of Retry Timer and Retry Counter.
When no response is received for TCP connection after
expiry of Retry Timer and Retry Counter.
When there is an open SSL error.
When the maximum file size is exceeded.
When there are too many Redirect or illegal operation from
curl response.
When access is denied.
When there is permission problem on the server.
When login fails.
When the system is retrieving config file.
When the remote file is not found.
When the config decryption has failed.
When the file parsing has failed.
When the root tag is not found.
When configuration is updated successfully.
694