•
Gateway IP Address: This displays the Gateway Address assigned to the Ethernet Port of SARVAM
UMG.
•
DNS Address: This displays the DNS address.
•
System MAC Address: This displays the MAC Address assigned to the Ethernet Port of SARVAM
UMG.
If you have cloned the MAC Address, System MAC Address will display the cloned MAC Address. You
can view the factory set MAC Address in System Detail.
•
Dynamic DNS Status: This displays the response received from DDNS server while sending the IP
Address update request to the server. The following are the responses which you may receive:
Possible Responses
Please Wait....!!
Updated Successfully - IP Address
Host has been blocked
Authentication Fail
No such host in the system
Invalid hostname format
Host not in this account
DNS error encountered
Server goes under schedule
maintenance
No Response
DDNS Failed
In all remaining cases, the default messages supported by DDNS client will appear in this.
•
Stack Status: This displays the SIP Stack Status.
NAT
•
NAT Type: This displays the NAT Type, if STUN is enabled in SARVAM UMG. The commonly used
NAT types are:
•
Unknown
•
Open
•
Conenat
•
Restrictednat
•
Portrestrictednat
•
Symmetricnat
•
Symmetricfirewall
•
Blocked
Matrix SARVAM UMG System Manual
Event
When system is waiting for error/ successful response from
DDNS server
IP Address updated successfully in DDNS server
When 'abuse' is received
When authentication check is failed either problem in user id
or password
When 'no host' is received
When 'notfqdn' is received
When '!Yours' is received
When 'dnserr' is received
When '911' is received
No response is received from DDNS server due to any
reason
For all remaining cases
696
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?