Network Selection - Matrix Telecom SIMADO GBR42 System Manual

Table of Contents

Advertisement

Matrix
What's this?
• Many times it happens that the system is installed in a remote
place which is hilly or at a place where it is surrounded by
multistoryed buildings. In such case, the mobile user may not get
registered with a suitable network and his work is affected. Same
problem is faced when he is moving out of his home region. User
of mobile station (Handset) has the user interface on the LCD,
which shows, the name of the available network and he can select
the desired network. But such user interface is not available in the
SIMADO GBR42, gateway. The same purpose is served by
providing multiple network operator options based on their specific
network operator code. The subscriber can select the network
manually or automatically, for each mobile port. This is known as

Network Selection.

• If the subscriber is working in the area where, his home network as
well as other network coverage is also available, then he can select
the network manually such that he can restrict the extra charges.
Normally subscriber uses this mode when he is working outside his
home network.
• But if the subscriber is always busy with important business matter,
then he would like to get registered with any network operator. He
wants to make and receive calls, at any cost. For such requirement
he will use this feature, in automatic mode.
• If required, user can program the number string using following
Codes for the Special digits:
102
Network Selection
SIMADO GBR42 V1 System Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SIMADO GBR42 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents