Matrix Telecom SARVAM UMG System Manual page 126

End-of-Dialing
• Set the duration of the Inter Digit Wait Timer. This is the time for which you want the system to wait while
receiving the digits dialed by the user, to consider it as end-of-dialing. You may change this timer, if
required. Valid range is 01 to 99 seconds. Default: 5 seconds.
• As End of Dialing Digit, select whether the system should consider # or * as termination digit to detect
end of dialing. Default: #
• In Minimum number of digits that can be dialed by the caller, select the minimum number of digits to
be dialed by the user for the system to consider it as a valid number. Valid range is 01 to 24 digits. Default:
2 digits.
• In Maximum number of digits that can be dialed by the caller, select the maximum number of digits to
be dialed by the user for the system to consider it as end-of-dialing. Valid range is 01 to 24 digits. Default:
24 digits.
When the user dials a number, the system will match it with the above end-of-dialing indications and
accept the one that matches first.
Matrix SARVAM UMG System Manual 120