Matrix Telecom SARVAM UMG System Manual page 264

• Click Submit to save settings.
• If you do not want to route calls without CLI through this port, select the Block Calls received without CLI
on this Mobile Port check box.
• To Route all Incoming calls (without CLI), you may select from any of the following methods:
• to the Fixed Destination Number, see
• after Answering the Call and Collecting the Digits, see
the Digits".
Default: after Answering the Call and Collecting the Digits.
Destination Port Determination
Select the Destination Port for routing calls for the Mobile Port. You may select from any of the following options:
• Fixed
• On the basis of Destination Number
• On the basis of Calling Party Number
Default: Fixed.
Read the description and follow the instructions for each of these destination port selection methods given
below.
If the destination number to be dialed out is an IP Address, SARVAM UMG will not check the Destination
Port Determination Method. Instead, it will route the call using the SIP Trunk / Group programmed for IP
Dialing. (To know more, see the feature description
Fixed
In this method, calls received on the Mobile Port are routed to a Fixed Destination Port, irrespective of the number
dialed on the Mobile Port.
To apply this method, do the following:
• In Select Destination Port for routing calls, select Fixed option.
• Click Settings
Matrix SARVAM UMG System Manual
.
"Route to the Fixed Destination
"Route After Answering the Call and Collecting
"IP Dialing").
Number".
258