Matrix Telecom SARVAM UMG System Manual page 215

The BRI Port - Destination Number Determination: DDI Number Based Table opens.
• In DDI Number, enter the DDI Numbers allotted by your service provider.
• For each DDI Number, enter the corresponding destination number in Destination Number.
• To apply Reverse DDI for each number, select the check boxes under Apply and select the Reference
ID for the number. Default: Apply Reverse DDI is disabled and Reference ID is 1.
• Click Submit to save and close the window to return to the Handling of Incoming Calls - Port Wise
window.
You can also configure the DDI Number Based Table from Advanced Settings. For instructions, see
"Destination Number Determination"
Route to the Called Party Number
In this method, a call received on the BRI Port is routed to a specific number depending upon the called party
number received in the SETUP Message on the BRI Port.
209
under Advanced Settings.
Matrix SARVAM UMG System Manual