When Name is received in the "FROM" header for incoming call on the SIP Trunk, SARVAM UMG will
display name and received URI as calling name. When Name is not received, SARVAM UMG will display
only the received URI as calling name.
You may disable this check box, if you do not want the system to display the received URI as calling name
on the SIP Trunk.
•
Click Submit.
Handling of Outgoing Calls
When a SIP Trunk is determined as the destination port, numbers dialed from this port constitute outgoing calls.
•
Click Handling of Outgoing calls to expand.
•
If you do not want to route outgoing calls through this SIP Trunk, select the Block calls through this SIP
Trunk check box.
•
To allow the users to make outgoing calls irrespective of whether the SIP Trunk has been successfully
registered with the proxy or not, select the Route Calls through this SIP Trunk without Registration
check box.
By default, the system does not allow outgoing calls to be made if the status of the SIP Trunk is 'not
registered'.
•
By default, the CLI of the SIP Trunk is sent to the called party when outgoing calls are made using the SIP
Trunk. If you do not want to send CLI, enable the CLIR check box. Default: Disabled.
Matrix SARVAM UMG System Manual
332
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?