SIP Network Profile
You can either edit the settings of the default Network Profile 1 or you can add a new profile. To do so, click Add
New Profile.
•
Click Advanced Settings link.
•
Click SIP Network Profile under SIP Profile.
•
The SIP Network Profile page opens.
•
Configure the following parameters:
•
Keep the SIP Network Profile check box enabled, to use this profile.
Clear this check box only if you do not want to use this profile.
•
Assign a Name to the Network Profile for identification. The Name can be a maximum of 24 characters.
•
Status displays the status of this Network Profile.
•
You can select Proxy or Peer-to-Peer as the Mode. Default: Peer-to-Peer.
•
If you select Proxy, you must configure the following parameters:
•
Registrar Settings
•
Redundancy Settings
•
Codec
•
VoIP Profile
489
Matrix SARVAM UMG System Manual
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?