Dial Plan
SARVAM UMG supports 8 Dial Plans with total 64 entries in each table. The Dial Plan contains a series of digits
and/or wildcard characters.
When a user dials a number, it is compared with the Destination Number configured in the Dial Plan. If a match is
found, the system routes the call immediately without waiting for End of Dialing and if a match is not found, the
system will wait for the End of Dialing and then route the call as per the Destination Port Selection method
configured.
Dial Plan will be applied on the — FXO Port, Mobile Port, SIP Trunk, BRI Port (Terminal) and T1E1 Port (Terminal)
— when,
•
the Destination Number Selection method used for routing the call is Answering the call and collecting
the digits.
and
•
the Destination Port Selection method is either Fixed or Calling Number Based.
Dial Plan will be applied on the — FXS Port, BRI Port (Network) and T1E1 Port (Network) — when,
•
the Destination Port Selection method is either Fixed or Calling Number Based.
Configuring Dial Plan Table
•
Click the Advanced Settings link.
•
Click the Dial Plan link.
477
Matrix SARVAM UMG System Manual
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?