Matrix Telecom SARVAM UMG System Manual page 287

When Mobile Port is determined as the destination port, numbers dialed from this port constitute outgoing calls.
• If you do not want to route outgoing calls though this Mobile Port, select the Block calls through this
Mobile Port check box. Default: Disabled.
• By default, the CLI of the Mobile Port is sent to the called party when outgoing calls are made using the
Mobile Port. If you do not want to send CLI, enable the CLIR check box. Default: Disabled.
• You can apply Automatic Number Translation logic on outgoing calls made from the Mobile Port.
• To apply ANT logic on the Called Numbers, select the Automatic Number Translation (ANT) for
Called Number check box. Default: Disabled.
• In Use Automatic Number Translation Table, select the ANT Table number you have configured for
the Mobile Port. Default: Table 1.
If you have not configured the Automatic Number Translation Table,
• Click Settings
281
.
Matrix SARVAM UMG System Manual