Virtual User - Matrix Telecom SARVAM UMG System Manual

Virtual User

Virtual Users are the external users who use the Mobile phones. The details of the Virtual Users needs to be
configured if As per Virtual User Table option is selected for Allow Virtual feature parameter in
of the Mobile Port.
The Virtual User table determines:
• the routing of incoming calls from the Mobile Port to the destination port.
• the routing of outgoing calls to the Mobile phone users.
• the access of Virtual Features to the Virtual Users.
To use the Virtual User features, make sure the
Configuring Virtual User Table
• Click the Advanced Settings link to expand.
• Click the Virtual User link. The Virtual User Table opens.
You can configure up to 250 entries in the table. This table is common for all the Mobile Ports.
• In Name, you may assign a Name to the Virtual User. When there is an incoming call on the Mobile port,
the name you assign will appear on the phone of the called party, if the phone supports CLI display.
During outgoing calls the name will not be sent.
The name you assign may consist of a maximum of 24 characters. Default: Blank.
• In Number, you can assign a Number corresponding to the name of the Virtual User. When a call is placed
or received through the Mobile port, the number you assign will appear on the phone of the called party, if
the phone supports CLI display. Users configured here will be allowed to use the Virtual features only if the
Allow Virtual Feature check box is enabled.
Matrix SARVAM UMG System Manual
"Pre-requisites" are fulfilled.
"General" settings
546