Matrix Telecom SARVAM UMG System Manual page 505

• When Codec Priority is set as Remote then system sends all the codecs as per the preference received
in SDP offered from remote party. Here, the system sends only configured codecs in remote
preference.
• Select the desired Codec Priority option using which system can decide which codecs — Local or
Remote — should be given preference. Default: Local.
VoIP Profile
If you have selected the SIP Trunk Mode as Proxy or Peer-to-Peer, configure the VoIP Profile.
• Click VoIP Profile.
• In SIP VoIP Profile, you can either select the default VoIP Profile 1 or Add New VoIP Profile option.
• Click Settings
For detailed instructions, see
You can also configure the SIP VoIP Profile under SIP Profile from Advanced Settings.
Advanced
If you have selected the SIP Trunk Mode as Proxy or Peer-to-Peer, configure the Advanced Settings.
• Click Advanced.
• Select the default SIP Transport for outgoing SIP messages from the following options:
• UDP: Outgoing messages are transported using UDP.
• TCP: Outgoing messages are transported using TCP.
499
to configure the parameters of the selected VoIP Profile.
"SIP VoIP Profile".
Matrix SARVAM UMG System Manual