Virtual Access Code - Matrix Telecom SARVAM UMG System Manual

Virtual Access Code

Virtual Access Code is a string of digits dialed to use the Virtual User features. Virtual users can access the
following features and facilities by dialing their Virtual Access Codes from a phone.
You can change the default access codes assigned to the respective features and facilities as per your
requirement.
• If you wish to use the Virtual features on Mobile Port then make sure that you have activated the
"Virtual User"
• Only one Virtual User can access the Virtual Feature on the Mobile Port at a time.
• Making a new Call and Disconnecting a call using Access Code will not be applicable to Virtual Users if
Allow Virtual Feature option is configured as Allow All or As per Virtual User Table in General settings
of the "Mobile
Configuring Virtual Access Codes
To change the default Access Codes assigned to the features,
• Click the Advanced Settings link to expand.
• Click the Virtual Access Codes link.
• Change the default Virtual Access Code for the feature as per your requirement. Virtual Access Codes can
be a maximum of 4 digits and digits 0-9, # and * are allowed.
If Virtual Access Code is configured as Blank then that specific feature will be disabled for the all the Virtual
Users.
Do not configure Virtual Access Codes that may conflict with the Emergency Numbers or Other Access
Codes.
• Click Submit to save changes.
545
License in the system.
Port".
Matrix SARVAM UMG System Manual