Destination Port Determination
For the port/channel/MSN number, select the Destination Port for routing calls from the following options:
•
Fixed
•
On the basis of Destination Number
•
On the basis of Calling Party Number
Default: Fixed.
Read the description and follow the instructions for each of these destination port selection methods given
below.
If the destination number to be dialed out is an IP Address, SARVAM UMG will not check the Destination
Port Determination Method. Instead, it will route the call using the SIP Trunk / Group programmed for IP
Dialing. (See
"IP Dialing"
Fixed
In this method, calls received on the T1E1 Port are routed to a Fixed Destination Port, irrespective of the number
dialed on the T1E1 Port.
To apply this method, do the following:
•
In Select Destination Port for routing calls, select Fixed option.
•
Click Settings
The Destination Port/Group for T1E1 Port window opens.
The default Routing Group and Fallback Routing Groups appear.
Matrix SARVAM UMG System Manual
to know more).
.
406
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?