Matrix Telecom SARVAM UMG System Manual page 544

The Digest Authentication Table window opens. You can configure upto 500 entries in this table. This
Table is common for all SIP Trunks.
• Enter the user name assigned to the caller/ calling device in the User ID. SARVAM UMG will use this
User ID to match the digest credentials sent by the caller/ calling devices when challenged.
Make sure the User ID you enter here and the User ID assigned at the calling end are the same. The
User ID may consist of a maximum of 40 characters. Default: Blank.
• Enter the password to authenticate the user ID in User Password. The password may consist of a
maximum of 24 characters. Default: Blank.
Make sure the User Password you enter here and the User Password assigned at the calling end are
the same.
• Click Submit to save the entries.
• Make sure you enable Digest Authentication on the desired SIP Trunk. For instructions, see
under "Basic Settings".
Matrix SARVAM UMG System Manual
"SIP Trunk"
538