Call Waiting - Matrix Telecom SARVAM UMG System Manual

Call Waiting

When your phone is busy, the Call Waiting feature notifies you about another incoming call in the form of beeps.
The Call Waiting feature of SARVAM UMG allows you to:
• reject the waiting call.
• ignore the waiting call.
• hold the current call and answer the waiting call.
• disconnect the current call and answer the waiting call.
To use any of these options, you may dial the respective Access Code.
• Call Waiting feature has priority over Call Forward-When Busy in call mature state i.e. when the FXS
Port is in speech with another port.
• If your SARVAM UMG has a 3G module, disable Call Waiting in the SIM Card before inserting it in the
Mobile Port to prevent current calls from being disconnected.
• Call Waiting feature does not apply:
• If Call Waiting feature is disabled.
• If Waiting Call is ignored.
• If already one Waiting Call is present.
• In the Programming Mode.
• In Conference.
• In Remote Held condition.
• In Dial state, Routing state and in Disconnect state.
Configuring Call Waiting
To receive Call Waiting Beeps as waiting call indication, Call Waiting must be enabled in the Class of Service of
the FXS Port. For instructions, see
How to use Call Waiting
You can set or cancel Call Waiting from Jeeves or from the phone connected to the FXS Port.
To set or cancel Call Waiting from Jeeves,
• Click the Basic Settings link to expand.
• Click the FXS Port link.
• Click the FXS Number tab on which you want to use this feature. The page of the selected port opens.
605
"FXS Port" under Basic Settings.
Matrix SARVAM UMG System Manual