Port Wise
To configure Handling of Calls Port wise,
•
Select the Port Wise check box.
•
Click Settings
•
The Handling of Calls - Port wise window opens.
•
Keep the Block calls received on this port check box disabled.
Select this check box only if you do not want to route calls through this port.
•
SARVAM UMG supports 8 Dial Plans with total 64 entries in each table. When a user dials a number, it
is compared with the Destination Number configured in the Dial Plan. If a match is found, the system
routes the call immediately without waiting for End of Dialing and if a match is not found, the system will
wait for the End of Dialing and then route the call as per the Destination Port Selection method
configured.
Select the Dial Plan table number you configured for this port. If you have not configured the Dial Plan
table you may do so now,
•
Click Settings
•
Configure the numbers in the table. For detailed instructions, see
•
Set the duration of the Dial Tone Timer as per your requirement. This is the time for which SARVAM
UMG will play Dial Tone to the caller. On expiry of this timer, the system plays error tone to the caller.
Valid range is 01 to 99 seconds. Default: 7 seconds.
167
.
. The Dial Plan Table opens.
"Dial
Plan".
Matrix SARVAM UMG System Manual
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?