Matrix Telecom SARVAM UMG System Manual page 612

• On the FXS Port page, click Supplementary Services.
• To set Call Waiting, select the Call Waiting Enable check box. Default: Disabled.
To cancel, clear the check box.
• Click Submit to save.
• Log out of Jeeves.
To set or cancel Call Waiting from the Phone,
• Lift handset of your phone.
• Dial #16-1 to set.
• Dial #16-0 to cancel.
• Replace handset.
When Call Waiting is enabled and you are in speech with Party A, you will hear call waiting beeps indicating
another incoming call from Party B. You may Reject, Ignore or Accept the Waiting Call by dialing the relevant
Access Code.
• To Reject the Waiting Call and Speech with Current Call, dial Flash-#31.
The beeps will stop, you will remain in speech with Party A.
OR
• To Ignore the Waiting Call and Speech with Current Call, dial Flash-#32.
The beeps will continue, you will remain in speech with Party A.
OR
• To Accept the Waiting Call and Hold Current Call, dial Flash-#33.
The beeps will stop, Party A will be put on hold and you will be in speech with Party B.
Matrix SARVAM UMG System Manual 606