Matrix Telecom SARVAM UMG System Manual page 335

• For the No Match Found entry in the table, click Edit
• The Edit Entry window opens.
• Create the Routing Group and Fallback Routing Group as per your requirement.
• Click Submit and close the window.
• Close the window if you have finished adding/editing entries.
You can also configure the Calling Number Based Table from Advanced Settings. For instructions, see
"Destination Port Determination"
Allowed - Denied Logic
You can apply the Allowed-Denied logic on the SIP Trunk (source port) if you want to allow or restrict the dialing of
particular numbers. You can use this feature for Toll Control.
The Allowed-Denied Number Logic makes use of two Number lists:
• Allowed Numbers List: This is the list of numbers that can be dialed out from the SIP Trunk.
• Denied Numbers List: This list contains the numbers that are to be restricted from being dialed out from
the SIP Trunk.
When Allowed-Denied Logic is enabled on a source port, for each number dialed from the port, SARVAM UMG
uses the best-match-found logic to compare the dialed number with the Allowed Number list and the Denied
Number list.
329
under Advanced Settings.
.
Matrix SARVAM UMG System Manual