•
Last time when Synchronized with Server: This displays the date (DD:MM:YYYY) and time
(HH:MM), when SARVAM UMG last synchronized with the server for new firmware updates.
•
Status of Last Synchronization: This displays the status of last synchronization. The possible status
messages that will be displayed are listed in the table below.
Possible Responses
Invalid Parameters
Local Failure
Resolving Server Address
Server Not Found
Send Request Failed
Connecting to Server
TCP Connection Failed
Connection Failed
Permission Denied
Downloading Firmware Index File
Downloading Firmware
File Not Found
Waiting for Firmware File Name
Matrix SARVAM UMG System Manual
Event
When parameters are not valid.
When internal error occurs, like Thread Creation failed.
When IP Address is not found using DNS query.
When server is not connected after the expiry of Retry
Timer and Retry Counter.
When there is Curl Internal Error
When system is establishing TCP connection with server
until the expiry of Retry Timer and Retry Counter.
When no response is received for TCP connection until
expiry of Retry Timer and Retry Counter.
When no response is received for TCP connection after
expiry of Retry Timer and Retry Counter.
When there is an open SSL error.
When the maximum file size is exceeded.
When there are too many Redirect or illegal operation from
curl response.
When access is denied.
When there is permission problem on the server.
When login fails.
When the system is retrieving Firmware Index file.
When the system is retrieving Firmware zip file.
When the remote file is not found.
When Check Firmware Available on Server button is
clicked manually and the list of available firmware is
presented.
692
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?