Matrix Telecom SARVAM UMG System Manual page 262

• Click Submit to save your entries. Close the window to return to the Mobile Port window.
You can also configure the Calling Number Based Table from Advanced Settings link. For
instructions, see
• For incoming calls with Calling Party Numbers that do not match with the Calling Party Number Table, you
may select the destination number determination method.
In the If no match found in the Calling Party Number Table, route calls box, you may select either to
the Fixed Destination Number or after Answering the Call and Collecting the Digits. Default: after
Answering the Call and Collecting the Digits.
Route After Answering the Call and Collecting the Digits
In this method, the system answers the incoming call on the Mobile Port and plays dial tone to the caller, allowing
the caller to dial the desired number. The number dialed by the caller is considered as the destination number.
To apply this method, do the following:
• In Route all incoming calls (with CLI), select after Answering the Call and Collecting the Digits.
Under Answering the Call and Collecting the Digits,
Matrix SARVAM UMG System Manual
"Destination Number Determination" under Advanced Settings.
256