Matrix Telecom SARVAM UMG System Manual page 542

Hide thumbs Also See for SARVAM UMG:

Table of Contents

Click the PIN Authentication link.

Now, configure the PIN Authentication table.

In PIN Number, enter the numbers with which callers will authenticate themselves. Default: Blank. The

digits 0 to 9, * and # are allowed in PIN Numbers.

The length of the PIN Number must not exceed four digits. If you enter a PIN Number that is less than 4

digits, the system will add leading zeros. The caller must also dial the PIN Number with the leading zeros to

authenticate.

For each PIN Number you store, enter an authenticating password in PIN Password. The password

can be of a maximum of four digits. The digits 0 to 9, * and # allowed. Default: Blank.

Click Submit to save the entries.

Now enable PIN Authentication on the desired — FXO Ports, SIP Trunks, Mobile Ports, BRI Ports

(Terminal) and T1E1 Ports (Terminal) — port.

To do so, first you need to select After Answering the Call and Collecting the Digits as the Incoming

Call Routing option under Handling of Incoming Calls. Now, enable Prompt caller to enter PIN on the

respective port.

Settings", see

for instructions.

Matrix SARVAM UMG System Manual

"BRI Port - Terminal", "T1 Port"

Need help?

Do you have a question about the SARVAM UMG and is the answer not in the manual?