Matrix Telecom SARVAM UMG System Manual page 385

• Click the respective MSN number to configure the parameters.
Configure the routing parameters for each MSN number:
• MSN Number 1: Enter the first MSN Number (max. 24 digits) provided by your Service Provider. Valid
digits are 0-9, # and *. Default: Blank.
• Total DDI Number: Specify Total DDI Numbers provided by your Service Provider. Valid range is 1 to
9999. Default: 0100.
• Name: Assign a Name for identification.
• Block calls received on this MSN Number.
• Route all Incoming Calls (with CLI), see
• Block Calls received without CLI on this MSN number.
• Route all Incoming Calls (without CLI), see
• Select the destination port for routing calls, see
• Allowed-Denied Logic, see
• Handling of Outgoing Calls, see
Copy MSN Based Routing Parameters
• You can also copy the settings of a MSN Number to another MSN Number using the Copy button. To do
this,
379
"Handling of Incoming
"Handling of Incoming
"Destination Port
"Allowed - Denied Logic".
"Handling of Outgoing Calls".
Calls".
Calls".
Determination".
Matrix SARVAM UMG System Manual