Matrix Telecom SARVAM UMG System Manual page 406

• The T1E1 Port - Destination Number Determination: Calling Number Based Table window opens.
• In Calling Number, enter the calling party numbers. The Calling numbers may consist of a maximum
of 24 characters. Default: Blank.
• For each calling party number, enter a corresponding destination number in Destination Number.
Destination numbers may consist of a maximum of 24 characters. Digits 0 to 9, *, # and (.) dot are
allowed. Default: Blank.
• Click Submit to save your entries. Close the window to return to the Handling of Incoming Calls - Port
Wise window.
You can also configure the Calling Number Based table from Advanced Settings. For instructions, see
"Destination Number Determination"
• Select a method for routing incoming calls with CLI that do not match with any entries in the Calling Party
Number Based Table.
In the If no match found in the Calling Party Number Table, route calls box, select the desired method
from the following options for processing the call:
• to a Fixed Destination Number
• on the basis of DDI Number
• to the Called Party Number
• after Answering the Call and Collecting the Digits
Default: to the Called Party Number.
Matrix SARVAM UMG System Manual
under Advanced Settings.
400