Matrix Telecom SARVAM UMG System Manual page 449

Hide thumbs Also See for SARVAM UMG:

Table of Contents

The CAS parameters window opens.

Configure the following parameters.

E1-CAS R2 MFC Parameters

Select the appropriate E1 Line Signaling Variant — ITU-T Q.400-Q.490, Brazil. Default: ITU-T Q.400-

If you select Brazil, all the CAS Parameters will be assigned default values as per Brazil.

Select the appropriate E1 Register Signal Variant — DTMF, MFC R2. Default: MFC R2.

If you select DTMF, DNIS/ANI is transmitted in the corresponding speech channel using the DTMF

signals as per ITU-T Q.23.

Matrix SARVAM UMG System Manual

Need help?

Do you have a question about the SARVAM UMG and is the answer not in the manual?