Matrix Telecom SARVAM UMG System Manual page 405

• Click Submit to save your settings.
Route on the basis of Calling Party Number
In this method, a call received on the T1E1 Port is routed to a specific number, as per the calling party's number.
You must configure the calling party numbers in the Calling Party Number Based Table.
When there is an incoming call on the T1E1 Port, SARVAM UMG will match the Calling Party Number with the
entries of the Calling Party Number Based Table. If a match is found, the call is routed to the destination number
configured for that Calling Party Number.
To apply this method, do the following:
• In Route all Incoming calls (with CLI), select on the basis of Calling Party Number.
• Click Settings
399
.
Matrix SARVAM UMG System Manual