Table of Contents
Advertisement
To configure the SIP Trunk parameters,
•
Click SIP-1.
The SIP Trunk-1 window opens.
•
Select the SIP Trunk check box to enable the SIP Trunk. You may disable the SIP Trunk, if you do not
want to route calls through this Trunk. Default: Disabled.
•
You can assign a Name to the SIP Trunk for identification. Default: Blank.
Assign the name of the ITSP with which the trunk is registered, or any other name of your choice. The
name will appear on the display of the remote party's phone, when a call is made through this SIP
Trunk.
•
In SIP ID, the SIP ID that you assign under Basic Settings is displayed.
•
Status displays the status of the SIP Trunk.
Matrix SARVAM UMG System Manual
296
Advertisement
Table of Contents
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?