Matrix Telecom SARVAM UMG System Manual page 172

General Parameters
• Click General to expand.
• Select the Interface Type as Point-to-Point or Point-to-Multipoint according to your installation. Default:
Point-to-Multipoint.
• Select TEI Negotiation for the BRI Port as Auto or Fixed. Default: Auto.
TEI (Terminal Endpoint Identifier) Negotiation mode is used to integrate the SARVAM UMG with a specific
ISDN-System. The TEI value programmed for BRI-NT Port should match the TEI value programmed in the
Terminal Equipment connected to it.
• If you set TEI Negotiation to Fixed, enter the value of the Fixed TEI Negotiation from 00 to 63. Default:
00.
• Keep the Orientation Type of the BRI Port as Network.
• Enable the Feed Power check box, if you want the system to feed power to the terminal equipments
connected to the BRI Port. Default: Disabled.
Handling of Calls
• Click Handling of Calls to expand.
• Select the method to route calls from the BRI Port. SARVAM UMG provides two options for Handling of
Calls: Port Wise and Channel Number Wise.
• Port Wise: Select this method to apply the call routing method for the entire port, that is, for all the
channels and all called party numbers received.
• Channel Number Wise: Select this method to apply a different call routing method for each channel.
• For the call routing option you select, click Settings
Matrix SARVAM UMG System Manual
and configure the parameters.
166