Matrix Telecom SARVAM UMG System Manual page 303

Basic Settings
Click Basic Settings to expand.
• In SIP ID, enter the SIP ID provided by your ITSP. For example, if the SIP URI provided by the ITSP is
12345@abc.com, enter 12345 in this field. Default: Blank.
The SIP ID is the number which remote parties will use to call this SIP Trunk.
The SIP ID may be a number or text consisting of a maximum of 40 characters.
• Enter the Authentication ID (User ID) provided by your ITSP. Default: Blank.
• Enter the Authentication Password provided by your ITSP. Default: Blank.
• In SIP Network Profile, you can either select the default Network Profile 1 or Add New Network Profile
option.
• Click Settings
For detailed instructions, see
You can also configure the SIP Network Profile from Advanced Settings. For instructions,
see "SIP Network Profile"
• Keep the SIP Registration check box enabled.
SARVAM UMG will send the REGISTER message to Registrar Proxy or Outbound Proxy as applicable.
Clear the check box, only if you want to disable registration. Default: Enabled.
• In Maximum Calls, select the number of simultaneous calls you want to allow on this SIP Trunk.
297
to configure the parameters of the selected Network Profile.
"SIP Network Profile".
under Advanced Settings.
Matrix SARVAM UMG System Manual