Matrix Telecom SARVAM UMG System Manual page 502

The Switch Registration to Alternate Server on Fallback will be applicable only if, SIP Registration is
enabled and Registration Behavior is set as Register with only one Server.
• Select the desired option for Load Balancing from the following:
• Last Call Active: Each new call will be processed through the Registrar/Outbound Proxy Server
through which the last active call has been processed.
For example, if the last call has been processed by Fallback Registrar/Outbound Proxy Server 2,
the new call will also be processed through Fallback Registrar/Outbound Proxy Server 2 only.
• First Active: Each new call will be processed through the first active Registrar/Outbound Proxy
Server only.
• Cyclic: Each new call will be processed through the next active Registrar/Outbound Proxy Server.
For example, if the last call has been processed by Fallback Registrar/Outbound Proxy Server 1,
the new call will be processed through Fallback Registrar/Outbound Proxy Server 2 and the
subsequent new call will be processed through the Registrar/Outbound Proxy Server.
Default: Last Call Active.
Codec Profile
If you have selected the SIP Trunk Mode as Proxy or Peer-to-Peer, configure the Codec Profile.
• Click Codec.
Codecs are used to compress the data in RTP packets to enable quick transmission. It also decompresses
the received data.
Matrix SARVAM UMG System Manual 496