Table of Contents
Advertisement
•
To Route all Incoming calls (without CLI), you may select from any of the following methods:
•
to a Fixed Destination Number, see
•
on the basis of DDI Number, see
•
to the Called Party Number, see
•
after Answering the Call and Collecting the Digits, see
the
Digits".
Default: to the Called Party Number.
Destination Port Determination
For the port/channel/MSN number, select the Destination Port for routing calls from the following options:
•
Fixed
•
On the basis of Destination Number
•
On the basis of Calling Party Number
Default: Fixed.
Read the description and follow the instructions for each of these destination port selection methods given
below.
If the destination number to be dialed out is an IP Address, SARVAM UMG will not check the Destination
Port Determination Method. Instead, it will route the call using the SIP Trunk / Group programmed for IP
Dialing. (To know more, see the feature description
Fixed
In this method, calls received on the BRI Port are routed to a Fixed Destination Port, irrespective of the number
dialed on the BRI Port.
213
"Route to a Fixed Destination
"Route on the basis of DDI
"Route to the Called Party
"Route after Answering the Call and Collecting
"IP
Dialing").
Number".
Number".
Number".
Matrix SARVAM UMG System Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?