Matrix Telecom SARVAM UMG System Manual page 724

Hide thumbs Also See for SARVAM UMG:

Table of Contents

Default: Disable

To restore factory defaults, dial 51-Reverse Command Password-#*

Replace the handset. The system will restart.

To view Connection Type, dial 20-#* and go On-hook

To view the Network IP Address, dial 21-#*and go On-hook

To view the Subnet Mask, dial 22-#*and go On-hook

To view the Gateway Address, dial 23-#*and go On-hook

To view the DNS Address, dial 24-#*and go On-hook

To display the LAN Port IP address on Phone, dial 46-#* and go On-hook.

To display the LAN Port Subnet Mask on Phone, dial 47-#* and go On-hook.

To view the Status of SIP Trunks, dial 27-SIP Trunk number-#* and go On-hook. SIP Trunk Number is

from 001 to 250.

The value of the parameter will be displayed on the LCD of the telephone instrument.

To exit programming mode, dial 00-#*

Matrix SARVAM UMG System Manual

Need help?

Do you have a question about the SARVAM UMG and is the answer not in the manual?