Matrix Telecom SARVAM UMG System Manual page 79

ETERNITY GE Card CO4+SLT16
L1 L2
Connector Color
Blue
RJ45-1
1
RJ45-2
2
RJ45-3
3
RJ45-4
4
RJ45-5
5
RJ45-
6
Plug in the RJ45 end of the MDF cables supplied with the card into the respective connectors. Refer to the
7.
pinout details of the connectors of each SLT Card type illustrated above.
Terminate the open end of the cables into the punch down blocks of the Krone modules designated for
8.
'Station Lines' in the
Each wire-pair from the ETERNITY SLT Port must be terminated to the bottom of the Krone Connector,
while the wire-pair of the extension line to be connected to this port must be terminated on the top of the
Krone connector. Refer the topic
Repeat the same steps to install another SLT card.
9.
Connecting SLT instruments
Connect the SLT instruments you have arranged for. Plug in the SLTs into the wall socket/outlets.
10.
• For the purpose of testing, you may connect one or two Single Line Telephone instruments by plugging
in the phone cables into the RJ45 connectors on the card.
• When you plug the RJ11 connector of SLT into an RJ45 connector on the SLT card, the SLT will be
connected on the first port on the connector.
73
Blue - (Blue & White)
Orange - (Orange & White)
Green - (Green & White)
Brown - (Brown & White)
Blue - (Blue & White)
Orange - (Orange & White)
Green - (Green & White)
Brown - (Brown & White)
Blue - (Blue & White)
Orange - (Orange & White)
Green - (Green & White)
Brown - (Brown & White)
Blue - (Blue & White)
Orange - (Orange & White)
Green - (Green & White)
Brown - (Brown & White)
Blue - (Blue & White)
Orange - (Orange & White)
6 Blue - (Blue & White)
Orange - (Orange & White)
"The Main Distribution Frame
"The Main Distribution Frame (MDF)"
Connection H/w Port Offset
SLT 01
SLT 02
SLT 03
SLT 04
SLT 05
SLT 06
SLT 07
SLT 08
SLT 09
SLT 10
SLT 11
SLT 12
SLT 13
SLT 14
SLT 15
SLT 16
CO 01
CO 02
CO 03
CO 04
(MDF)".
for illustration.
Matrix SARVAM UMG System Manual