Matrix Telecom SARVAM UMG System Manual page 440

• Click the Copy button. The Copy T1E1 Port MSN based routing parameters from MSN Number
window opens.
• In the Copy T1E1 Port MSN based routing parameters from MSN Number box, select the MSN
Number you want to copy settings From. Select the check boxes of the desired MSN Numbers you
want to copy the settings To.
• If you want to copy the settings To all the MSN Numbers, select the All check box.
• Click the OK button.
• Once you have copied the settings, you can again edit the specific parameters of the MSN Number you
copied the settings to.
• Close the T1E1 Port 1 MSN Number 1 window.
• To configure any MSN Number, click the respective MSN Number on the T1E1 Port 1 - Call Routing -
MSN/DDI Number Wise window and follow the same instructions as given above.
• Close the T1E1 Port 1 - Call Routing - MSN/DDI Number Wise window.
Handling of Outgoing Calls
Click Handling of Outgoing Calls to expand.
When T1/E1 Port is determined as the destination port, numbers dialed from this port constitute outgoing calls.
For outgoing calls from T1/E1 Port, you can apply the features Automatic Number Translation (ANT) and Route
Calls Returned Unconnected to Original Caller.
Matrix SARVAM UMG System Manual 434