Matrix Telecom SARVAM UMG System Manual page 403

• Click Settings
• The Handling of Incoming Calls - Port Wise window opens.
• Keep the Block calls received on this port check box disabled.
Select this check box only if you do not want to route calls received on this port.
Destination Number Determination
Select the desired destination number determination method for routing incoming calls with and without CLI.
• To Route all Incoming calls (with CLI), you may select from any of the following methods:
• without any Destination Number
• to a Fixed Destination Number
• on the basis of Calling Party Number
• on the basis of DDI Number
• to the Called Party Number
• after Answering the Call and Collecting the Digits
Default: to the Called Party Number
Read further for instructions on selecting and configuring each of these destination number determination
methods.
If the destination number to be dialed out is an IP Address, SARVAM UMG will not check the Destination
Port Determination Method. Instead, it will route the call using the SIP Trunk / Group programmed for IP
Dialing. (See "IP Dialing"
397
.
to know more).
Matrix SARVAM UMG System Manual