Matrix Telecom SARVAM UMG System Manual page 258

• The Manual Network List Priority window opens.
• In the Priority levels, Priority1 to Priority 9, enter the Network Operator Codes with which you want
the SIM to register, as per your preference.
The Network Operator Code may consist of a minimum of 5 digits and a maximum of 8 digits.
Default: Blank.
• Click Submit and then close the Manual Network List Priority window.
• Enter the SMS Service Center Number, as provided to you by your service provider. This number is used
by the system while sending the SMS notifications.
• Select the Allow Call Disconnection using Access code check box to enable the Disconnect Call using
Access Code feature on the Mobile Port. For further details, see
Code".
• Select the desired option in Allow Virtual Feature — Don't Allow, Allow All, As per Virtual User Table to
determine the access of Virtual feature to the user during an ongoing call.
• If you select Don't Allow, then the system will not allow access to Virtual User feature. However, you
can access the feature access code for making or disconnecting a call on this mobile port.
• If you select Allow All, then the system will allow access of Virtual feature. However, you cannot
access the feature access code for making or disconnecting a call on this mobile port.
• If you select As per Virtual User Table, then system will allow access of Virtual feature only to those
Virtual Users as configured in the Virtual User Table.
• Select the Extended CLI check box only when a wrong CLI is being displayed. When this parameter is
enabled, the current caller's CLI will be displayed. By default, it is disabled.
• Click Submit to save.
Matrix SARVAM UMG System Manual
"Disconnecting a Call using Access
252