•
Click Submit and close the window.
•
Close the window if you have finished adding/editing entries.
You can also configure the Destination Number Based Table from Advanced Settings. For instructions,
see
"Destination Port Determination"
•
Select a method for routing outgoing calls, if no match is found in the Destination Number Table.
In If no match found in the Destination Number Table, select the desired option for routing the call. You
may select — Route calls to Fixed Port or Disconnect Call. Default: Route calls to Fixed Port.
If you select Route calls to Fixed Port, click Settings
the call. For instructions, see
Allowed - Denied Logic
You can apply the Allowed-Denied logic on the FXS Port (source port) if you want to allow or restrict the dialing of
particular numbers. You can use this feature for Toll Control.
The Allowed-Denied Number Logic makes use of two Number lists:
•
Allowed Numbers List: This is the list of numbers that can be dialed out from the FXS Port.
•
Denied Numbers List: This list contains the numbers that are to be restricted from being dialed out from
the FXS Port.
When Allowed-Denied Logic is enabled on a source port, for each number dialed from the port, SARVAM UMG
uses the best-match-found logic to compare the dialed number with the Allowed Number list and the Denied
Number list.
The number is allowed to be dialed, if it:
•
matches with both lists.
•
matches with Allowed Number list, but not with the Denied Number list.
•
matches with neither the Allowed List nor the Denied List.
The number is denied, if it matches with the Denied Number list, but not with the Allowed Number list.
The system does not apply the Allowed-Denied Logic:
•
When dialed number string matches with any Access Code.
•
When dialed number string matches with any Emergency Number.
To apply Allowed - Denied Logic on the FXS Port,
•
Select the Allowed - Denied Logic check box.
117
under Advanced Settings.
"Fixed".
to configure the Destination Port/Group for routing
Matrix SARVAM UMG System Manual
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?