Matrix Telecom SARVAM UMG System Manual page 83

Firmware Management enables you to manage the upgradation of the system software with a click of a
button.
Debug allows you to enable and configure the debug settings.
Application Selection
Through Application Selection, you can select the application you wish to run on the ETERNITY GENX Platform.
• In Select an Application, you may select the required application — SARVAM UCS SME or SARVAM
UMG. Default: SARVAM UCS SME.
• Select the Always start the selected application when system restarts check box to enable. The
selected application will start whenever the system restarts.
Keep the check box disabled only if you want to select the application to be run on the ETERNITY GENX
platform everytime the system restarts. Default: Disabled.
• Now, click on the Next button to proceed to the SARVAM UMG Configuration.
When you click the Next button, you will be redirected to the SARVAM UMG Application.
To return back to this page, see
Once you are redirected to the SARVAM UMG Application,
• If you have purchased the SARVAM UMG SME License, you must activate it. For detailed instructions,
refer "How to activate your
• If you have not purchased the license and you wish to use the features on trial basis, you can use the
Demo Provision. Demo Provision enables you to use the SARVAM UMG application, free of cost for a
period of 60 days.
During the Demo Provision you can access and use all the features and functionalities
application. For detailed instructions, refer
6. The number of Vocoder channels that will be supported in demo period will be equal to the total number of channels available in
the Vocoder module/s installed in the System.
77
"Switch Application"
License".
"Demo Provision".
in "System Detail".
Matrix SARVAM UMG System Manual
6
supported by the