Disconnecting A Call Using Access Code - Matrix Telecom SARVAM UMG System Manual

Disconnecting a Call using Access Code

SARVAM UMG enables users to disconnect a call using an access code. When the Disconnect Call Access Code
is dialed, SARVAM UMG releases the port engaged in the call.
Disconnecting a Call using Access Code will not be allowed if Allow Virtual Feature option is selected as
Allow All or As per Virtual User Table in the General settings of the Mobile Port.
Configuring Call Disconnection using Access Code
To provide this feature to users, you must enable Allow Call Disconnection using Access code on the FXO
Ports, BRI Ports, SIP Trunks, Mobile Ports and T1E1 Ports. For instructions, see
"BRI Port - Network", "SIP
How to Disconnect a Call using Access Code
• You are in speech or are at the end of the current call.
• Dial #92
619
Trunk", "Mobile Port", "T1 Port"
"FXO Port", "BRI Port - Terminal",
and "E1 Port" under Basic Settings.
Matrix SARVAM UMG System Manual