Matrix Telecom SARVAM UMG System Manual page 479

• Click Message Wait to expand and configure the following.
• Set the duration of the Message Wait Ring Timer. This timer defines the time duration for which the
Message Wait Ring will be played on the FXS Port for Message Wait Notification. Valid range is 01 to
60 seconds. Default: 30 seconds.
• Set the duration of the Message Wait Ring Interval Timer. This timer defines the time duration after
which SARVAM UMG will play the Message Wait Ring again on the FXS Port for the Message Wait
Notification, if the previous ring was unanswered by the user. Valid range is 001 to 999 minutes.
Default: 1 minute.
• In Message Wait Ring Count, enter the number of times you want SARVAM UMG to play the
Message Wait Ring on the FXS Port, until it is answered by the FXS Port user. Valid range is 1 to 10.
Default: 3.
Server Port
• Click Server Port to expand and configure the following.
• Configure the HTTP Web Server Port. SARVAM UMG has an embedded web server called Jeeves,
for the system configuration. You can access Jeeves using HTTP. You can change it as per your
requirement. Valid range is 80/ 1031 to 65535. Default: 80.
• Configure the HTTPS Web Server Port. You can access Jeeves of SARVAM UMG using HTTPS. You
can change it as per your requirement. Valid range is 443/ 1031 to 65535. Default: 443.
• Configure the FTP Server Port. SARVAM UMG has an embedded FTP server for Software Upgrade.
You can change it as per your requirement. Valid range is 21/ 1031 to 65535. Default: 21.
• Configure the Telnet Server Port. You can access SARVAM UMG using Telnet. You can change it as
per your requirement. Valid range is 23/ 1031 to 65535. Default: 23.
473 Matrix SARVAM UMG System Manual